Montana AWD V6-3.4L VIN E (2004)
Wiper Motor: Service and Repair
Wiper Motor Replacement - Rear
WIPER MOTOR REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the rear wiper arm.
2. Remove the rear wiper motor drive shaft nut.
3. Remove the washer and seal from the wiper motor drive shaft.
4. Remove the liftgate trim panel.
5. Remove the rear wiper motor screws.
6. Remove the rear wiper motor from the liftgate.
7. Disconnect the rear wiper motor electrical connector.
8. Remove the rear wiper motor from the vehicle.
INSTALLATION PROCEDURE