Montana FWD V6-3.4L VIN E (2005)
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws to the floor console bracket.
Tighten the screws to 2 N.m (18 lb in).
3. Install the DVD player. Refer to DVD Player Replacement in Entertainment.
4. Install the bezel to the floor console. Refer to Accessory Power Receptacle Replacement - Floor Console in Power Outlets.
Console Replacement - Overhead (CF5)
Console Replacement - Overhead (CF5)
Removal Procedure
1. Insert a small, flat-bladed tool between the interior lamp/multifunction switch/reading lamp housing and the overhead console.
2. Press inward and down in order to release the interior lamp/multifunction switch/reading lamp housing from the overhead console.
3. Remove the interior lamp/multifunction switch/reading lamp housing from the overhead console.
4. Disconnect the electrical connectors from the interior lamp/multifunction switch.
5. Use a flat-bladed tool in order to unsnap the retainers from the overhead console bracket.
6. Remove the overhead console from the headliner.
Installation Procedure