Montana SV6 V6-3.9L (2007)
Important: The actuator lever can only be inserted into the door one way.
1. Install the air temperature actuator lever (3), if necessary.
2. Install the air temperature actuator (2).
Notice: Refer to Fastener Notice.
3. Install the air temperature actuator bolts/screws (1).
Tighten the bolts/screws to 1.2 N.m (11 lb in).
4. Connect the air temperature actuator electrical connector (7).
5. Install the driver side knee bolster.
6. Re-calibrate the actuators. Refer to Actuators Recalibration. See: Testing and Inspection/Programming and Relearning