Montana SV6 V6-3.9L (2007)
Caution: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear and/or
intermediate shaft. This damage can cause loss of steering control which could result in personal injury.
12. Remove the intermediate shaft pinch bolt and separate the intermediate shaft from the steering gear.
13. Place a jack stand at the rear of the cradle support.
14. Remove the 2 rear cradle support bolts.
15. Using the jack stand, lower the rear of the cradle support for clearance.
16. Remove the 2 power steering gear heat shield bolts and the shield.
