Parisienne V8-350 5.7L DSL (1983)
Output Shaft: All Technical Service Bulletins
Tools - End Play Checking
Number
83-I-123
Section 7
Date 08/83
Subject:
END PLAY CHECKING TOOLS - THM 700-R4 TRANSMISSION (ALL)
There are two end play checking fixture adapters available for checking end play on THM 700-R4 transmissions (see illustration)..
J-34725 is used for 298 mm style turbine shafts and J-25022 is used for 245 mm style turbine shafts..
Be certain to use the correct tool and follow the Service Manual procedure when checking end play.