Solstice L4-2.0L Turbo (2008)
Variable Valve Timing Actuator: Service and Repair
Camshaft Position Intake Actuator Replacement
Camshaft Position Intake Actuator Replacement
Tools Required
*
EN 46327 Timing Chain Tensioner Tool
*
J 45059 Angle Meter
Removal Procedure
1. Remove the camshaft cover. Refer to Intake Manifold Cover Replacement (See: Intake Manifold/Service and Repair) .
2. Remove the upper timing chain guide bolts and guide.
3. Install a 24 mm wrench onto the hex on the camshaft in order to hold the camshaft.
4. Loosen, but DO NOT remove the intake camshaft actuator bolt.
