Solstice L4-2.4L (2007)
![background image](/pontiac/solstice/l4-2.4l/Page-950001.png)
Fuel Rail: Service and Repair
Fuel Rail Assembly Replacement
Removal Procedure
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief.
2. Disconnect the fuel feed line quick connect fitting from the fuel rail.
3. Remove the air cleaner outlet duct.
4. Disconnect the fuel injector inline electrical connector (1).
5. Disconnect the electronic throttle control (ETC) electrical connector (3).
6. Remove the 2 engine harness clips (2, 5) from the fuel rail tabs.
7. Remove the fuel rail bolts (1).
Important: Use care when removing the fuel rail assembly in order to prevent damage to the fuel injectors electrical connector terminals