Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Backup Lamp Switch: Service and Repair
Backup Lamp Switch Replacement
Removal Procedure
Notice: When removing or installing the backup light switch, do not use an open end wrench. Use only a socket in order to avoid damage to the
switch assembly.
1. Disconnect the backup lamp connector.
2. Remove the backup light switch assembly.
Installation Procedure
Notice: When removing or installing the backup light switch, do not use an open end wrench. Use only a socket in order to avoid damage to the
switch assembly.
Notice: Refer to Fastener Notice in Service Precautions.