Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
4. Install the connector position assurance (CPA) to the SDM wiring harness connector.
5. Install the carpet and the passenger front carpet retainer.
6. Install the passenger front seat.
7. Enable the SIR system.
8. If the part number for the SDM has changed it will be necessary to flash the BCM with the new part number. Refer to BCM Programming/RPO
Configuration in Body Control Module. See: Relays and Modules - Powertrain Management/Relays and Modules - Computers and Control
Systems/Body Control Module
