Sunfire L4-2.2L VIN F (2002)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
CAUTION: Proper operation of the Supplemental Inflatable Restraint (SIR) sensing system requires that any repairs to the vehicle structure
return the vehicle structure to the original production configuration. Not properly repairing the vehicle structure could cause non-deployment
of the air bag(s) in a frontal collision or deployment of the air bag(s) for conditions less severe than intended.
After any collision, inspect the following components as indicated. If any damage is detected, replace the component. If any damage to the mounting
points or mounting hardware is detected, repair the component or replace the hardware as needed.
^
Steering column Perform the steering column accident damage checking procedures. Refer to Steering Column Accident Damage Inspection - Off
Vehicle in Steering Wheel and Column.
^
IP knee Bolsters - Inspect the knee bolsters for bending, twisting, buckling, or any other type of damage.
^
IP brackets, braces, etc. - Inspect for bending, twisting, buckling, or any other type of damage.
^
Seat Belts - Perform the seat belt operational and functional checks. Refer to Operational and Functional Checks in Seat Belts.
^
IP Cross Car Beam - Inspect for bending, twisting, buckling, or any other type of damage.
^
IP Mounting Points and Brackets - Inspect for bending, twisting, buckling, or any other type of damage.
^
Seats and Seat Mounting Points - Inspect for bending, twisting, buckling, or any other type of damage.
