pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Antenna, Radio > < Antenna Mast|Service and Repair
Page 1
background image

Global Positioning System Antenna: Service and Repair

ANTENNA ASSEMBLY REPLACEMENT - CELLULAR AND NAVIGATION

REMOVAL PROCEDURE

1. Remove the windshield garnish molding. 
2. Remove the sunshade from the headliner. 
3. Remove the door edge molding from the door opening. 
4. Lower the front corner of the headliner. Refer to Headliner Replacement in Interior Trim.

5. Disconnect the wire harness from the roof antenna.
6. Remove the antenna nut.
7. Remove the antenna from the roof.

INSTALLATION PROCEDURE

1. Attach the antenna base to the roof and fasten the antenna nut.

Tighten the nut to 2 N.m (18 lb in).

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Connect the electrical connector to the antenna.
3. Push the headliner back into place. Refer to Trim Panel Replacement - Side Front Door in Interior Trim.
4. Attach the sunshade to the headliner. Refer to Sunshade Replacement in Interior Trim.
5. Attach the windshield garnish molding. Refer to Windshield Upper Garnish Molding Replacement in Interior Trim.

Antenna, Radio > < Antenna Mast|Service and Repair