Torrent AWD V6-3.4L VIN F (2006)
Seat Heater: Service and Repair
Seat Back Heater Element Replacement - Front (Non-Fold Flat)
Seat Back Heater Element Replacement - Front (Non-Fold Flat)
Removal Procedure
1. Remove the front seat. Refer to Seat Replacement - Front Bucket (See: Service and Repair/Removal and Replacement/Seat Replacement - Front
Bucket) .
2. Remove the outer trim panel from the seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (2-Way) (See: Seat
Cushion/Service and Repair/Removal and Replacement/Seat Cushion Outer Trim Panel Replacement - Front Seat (2-Way))Seat Cushion Outer
Trim Panel Replacement - Front Seat (4-Way) (See: Seat Cushion/Service and Repair/Removal and Replacement/Seat Cushion Outer Trim Panel
Replacement - Front Seat (4-Way)) .
3. Disconnect the electrical connector from the seat heat module.
4. Disconnect the lower J-hook retainer from the seat back trim cover.
5. Carefully lift the trim cover, disengaging the hook and loop retainers until the heater element is exposed.