pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Sensors and Switches - Brakes and Traction Control > < Component Locations|Page 10751
Page 3
background image

5. Connect the electrical connector to the EBCM.

6. Reposition the TCM, if equipped, to the mounting bracket.
7. Turn the ignition switch to the ON position. DO NOT start the engine.
8. Perform the Diagnostic System Check - Vehicle in Vehicle DTC Information.   See: Powertrain Management/Computers and Control

Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures

Sensors and Switches - Brakes and Traction Control > < Component Locations|Page 10751