Torrent AWD V6-3.4L VIN F (2006)
7. Remove the compressor hose nut from the condenser.
8. Remove the compressor hose from the condenser.
9. Install a protective cap to the condenser to prevent contamination and desiccant saturation.
10. Raise and support the vehicle. Refer to Vehicle Lifting.
11. Disconnect the electrical connector from the pressure transducer.
12. Remove the compressor hose nut at the compressor.
13. Remove the compressor hose from the compressor.
14. Install a protective cap to the compressor to prevent contamination and desiccant saturation.
15. Remove the compressor hose from the vehicle.
16. Remove and discard the sealing washers from the compressor hose.
INSTALLATION PROCEDURE