Torrent AWD V6-3.4L VIN F (2006)
Installation Procedure
1. Install a new seal to the thermal bypass fitting.
2. Apply engine coolant to the thermal bypass fitting seal to ease installation.
3. Install the thermal bypass fitting (1).
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the thermal bypass fitting bolt (2).
Tighten the bolt to 12 Nm (106 inch lbs.).
5. Install the heater outlet hose (2) to the thermal bypass fitting.
6. Position the heater outlet hose clamp (1) over the thermal bypass fitting.