Torrent AWD V6-3.4L VIN F (2006)
Relay Box: Service and Repair
Underhood Electrical Center or Junction Block Replacement
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the underhood accessory wiring junction block cover.
3. Remove the nut at the end of the fuse block and remove both the positive battery cable and the EPS cable.
4. Loosen the bolts (1) on the top of the fuse block until the block can be lifted off the connectors.
5. Remove the I/P connectors (2).