Torrent AWD V6-3.4L VIN F (2006)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - ENGINE
REMOVAL PROCEDURE
1. Remove the generator.
2. Remove the nuts (1) securing the evaporative emission (EVAP) hose/pipe (2) to the strut tower.
3. Disconnect the EVAP purge hose/pipe (2) from the purge solenoid.
4. Disconnect the engine EVAP purge hose/pipe from the chassis EVAP purge hose/pipe.
5. Cap or plug both the engine and chassis EVAP purge hose/pipes to prevent contamination.