Torrent AWD V6-3.4L VIN F (2006)
10. Remove the ignition control module bracket bolts (2).
11. Remove the ignition control module bracket nuts (6).
12. Remove the ignition control module bracket.
INSTALLATION PROCEDURE
1. Install the ignition control module bracket.
2. Install the ignition control module bracket nuts (6).
Tighten the nuts to 25 N.m (18 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the ignition control module bracket bolts (2).
Tighten the bolts to 25 N.m (18 lb ft).