Torrent AWD V6-3.4L VIN F (2006)
11. Twist together one end from each of the wires in order to short the wires. Deployment wires shall remain shorted, and not connected to a power
source until you are ready to deploy the seat belt pretensioner.
12. Twist together one connector wire lead to one deployment wire.
13. Inspect that the previous connections is secure.
14. Bend flat the twisted connection.
15. Secure and insulate the connection using electrical tape.
16. Twist together, bend, and tape the remaining connector wire lead to the remaining deployment wire.
17. Connect the deployment harness to the seat belt pretensioner connector.
18. Route the deployment harness out of the driver side of the vehicle.