Torrent AWD V6-3.4L VIN F (2006)
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the lumbar actuator to the seat cushion frame with screws.
Tighten the screws to 2 N.m (18 lb in).
2. Install the lumbar knob.
3. Install the lumbar cable in the actuator:
1. Pull back on the lumbar cable sleeve.
2. Install the barrel end of the cable from the lumbar actuator.
3. Adjust the knob to ensure that the cable is properly installed.
4. Install the front seat. Refer to Seat Replacement - Front Bucket (See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Seat
Replacement - Front Bucket) .