Torrent AWD V6-3.4L VIN F (2006)
4. Important: Do not damage the wheel drive shaft joint seal.
Support the wheel drive shaft with heavy mechanic's wire, or equivalent.
5. Remove the wheel bearing/hub mounting bolts.
6. Remove the wheel bearing/hub assembly from the suspension knuckle.
Installation Procedure
1. Install the wheel bearing/hub assembly to the steering knuckle.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the wheel bearing/hub mounting bolts.
^
Tighten the bolts to 84 Nm (62 ft. lbs.).