Torrent AWD V6-3.4L VIN F (2006)
31. Install the bearing (1) into the clutch over from the outer race with a suitable driver.
32. Install the snap ring (2) into the groove.
Installation Procedure
1. Install a new filter assembly.
2. Install the locating pins.
3. Align the clutch with the pump and pump bushing. Place the J 46607 in the splines of the clutch. Twist alignment tool back and forth to align the
pump and bushing. With a properly aligned clutch, the groove on the J 46607 will be flush with the drum as shown. Remove the tool by pulling
straight out.