Torrent AWD V6-3.4L VIN F (2006)
Seals and Gaskets: Service and Repair
Axle Shaft Oil Seal Replacement
^
Tools Required
-
J 38868 Output Shaft Assembly Remover and Installer
-
J 44809 Output Shaft Seal Installer
-
J 6125-1B Slide Hammer with Adapter
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right wheel drive shaft.
3. Remove the retainer ring from the stub shaft for tool installation. Discard the used retainer ring.
4. Remove the stub shaft using the J 6125-1B and J 38868 .
5. Carefully, remove the output shaft seal and discard.
Installation Procedure