Torrent AWD V6-3.6L (2008)
1. Install the coolant air bleed pipe to the engine.
Notice: Refer to Fastener Notice .
2. Install the coolant air bleed pipe bolts (3) to the upper intake manifold.
Tighten the bolt to 10 N.m (89 lb in).
3. Install the coolant air bleed hose (2) to the coolant air bleed pipe.
4. Position the coolant air bleed hose clamp (1) at the coolant air bleed hose.
5. Install the surge tank inlet hose. Refer to Radiator Surge Tank Inlet Hose/Pipe Replacement (LNJ) (See: Coolant Reservoir/Service and Repair
)Radiator Surge Tank Inlet Hose/Pipe Replacement (LY7) (See: Coolant Reservoir/Service and Repair) .
6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement) .
