Torrent AWD V6-3.6L (2008)
1. With key inserted into cylinder, insert cylinder into housing (2). This will hold the pawl (1) into position once the cylinder is inserted into the
housing.
2. Shutter (8) and compression spring (6) are pre assembled to the cylinder in the service package.
3. Install the cap (9) by aligning the notch in the cap with the large drain slot in the housing and pressing the cap until it bottoms out and snaps onto
the housing (2).
Glove Compartment Door Lock Cylinder Coding
1. Select the correct lock tumblers for the desired code by the number stamped on the tumbler.
2. Install lock tumblers (2), by applying downward pressure until locked into position.