Torrent AWD V6-3.6L (2008)
3. Remove the outer tie rod. Refer to Rack and Pinion Outer Tie Rod End Replacement (See: Tie Rod/Tie Rod End/Service and Repair) .
4. Remove the jam nut.
5. Remove the spring from the boot, outer end.
6. Cut and remove the crimp clamp, inner end. Discard the clamp.
Important: After removing the boot, inspect the inner tie rod for evidence of corrosion or contamination. If none is evident, continue
with the repair. If corrosion or contamination is evident, replace the steering gear.
7. Unseat the boot from the steering gear and remove.