Torrent AWD V6-3.6L (2008)
3. Install the knuckle to the toe link. Loosely install the bolt and nut.
4. Install the 3 trailing arm to knuckle bolts. Loosely install the bolt and nut.
Notice: Refer to Fastener Notice .
5. Tighten the bolts and nuts in the following sequence:
*
Tighten the knuckle to lower control arm bolt and nut to 160 N.m (118 lb ft).
*
Tighten the knuckle to upper control arm bolt and nut to 160 N.m (118 lb ft).
*
Tighten the knuckle to toe link bolt and nut to 160 N.m (118 lb ft).
*
Tighten the 3 trailing arm to knuckle bolts to 110 N.m (81 lb ft).
6. Install the wheel bearing/hub assembly. Refer to Rear Wheel Bearing and Hub Replacement (See: Wheel Bearing/Service and Repair/Rear
Suspension) .
Notice: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible