Torrent AWD V6-3.6L (2008)
7. Remove the transaxle cooler line assembly nut (2) from the transaxle.
8. Remove the transaxle cooler lines (1) from the vehicle.
9. Replace the transaxle oil cooler pipe seals. Refer to the Fluid Cooler Pipe Seal Replacement (See: ) .
Installation Procedure
1. Install the transaxle oil cooler lines into the vehicle.
2. Install the transaxle oil cooler line assembly (1) to the transaxle.
Notice: Refer to Fastener Notice .
3. Install the transaxle oil cooler line assembly nut (2).
Tighten the transaxle oil cooler lines to 9 N.m (80 lb in).
4. Connect the lower transaxle oil cooler line to the radiator.