Torrent AWD V6-3.6L (2008)
5. Remove the input speed sensor O-ring. Discard the O-ring.
Installation Procedure
1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new input speed sensor O-ring.
2. Install the new input speed sensor O-ring onto the input speed sensor.
3. Install the input speed sensor to the transaxle.
Notice: Refer to Fastener Notice .
4. Install the input speed sensor bolt.
Tighten the bolt to 6 N.m (53 lb in).
5. Connect the electrical connector (4) to the input speed sensor.
6. Install the battery tray . Refer to Battery Tray Replacement .