Torrent AWD V6-3.6L (2008)
9. Remove the mounting bolts for the center support bearing.
10. With the aide of an assistant, remove the propeller shaft from the vehicle.
Installation Procedure
1. Thoroughly clean the mounting bolts for center bearing and the front and rear propeller shaft flanges. Apply threadlocker, GM P/N 89021297
(Canadian P/N 10953488), to the bolt threads
2. With the aide of an assistant, position the propeller shaft on the supports.
3. Align the reference marks on the front and rear of the propeller shaft to the transfer case and rear differential.
4. Position the propeller shaft on the transfer case output flange.
5. Finger tighten the mounting bolts for the propeller shaft at the transfer case output flange.