Torrent FWD V6-3.4L (2007)
Coolant Line/Hose: Service and Repair
Heater Inlet Pipe Replacement
Heater Inlet Pipe Replacement
Removal Procedure
1. Drain the cooling system.
2. Release and slide the heater core inlet hose clamp away from the heater inlet pipe connection.
3. Disconnect the heater core inlet hose from the heater inlet pipe.
4. Remove the heater inlet pipe nut (2).
5. Remove the heater inlet pipe (1).
6. Remove the seal (3) from the heater inlet pipe (1).
Installation Procedure
1. Install a new seal (3) to the heater inlet pipe (1).
2. Apply engine coolant to the heater inlet pipe seal (3).