Torrent FWD V6-3.4L (2007)
3. Install the engine mount to engine mount bracket bolts. Take care when aligning the engine mount to engine mount bracket bolt holes, while hand
tightening all the bolts.
4. Tighten the engine mount to engine mount bracket bolts.
Tighten the bolts to 50 N.m (81 lb ft).
5. Lower the vehicle.
6. Remove the engine support.
7. Install the air cleaner assembly.
Engine Support Fixture
Engine Support Fixture
Installation Procedure
Tools Required
*
J 28467-B Universal Engine Support Fixture
*
J 36462-A Engine Support Adapter Leg Set
*
J-28467-13 Engine Support Fixture Adapters
*
GM P/N 11519137 4 Studs or equivalent
1. Remove the fuel injector sight shield.
2. Pull each end of the hood rear seal away from the cowl panel flange near both strut towers.