Torrent FWD V6-3.4L (2007)
6. Install a 127 cm (50 in) engine support fixture cross bar (2) transversely across the vehicle between both J 28467-5 strut tower adapters.
7. Insert safety pins (1, 3) through the J 28467-5 strut tower adapters and the cross bar (2) to prevent movement.
Important: If 58 cm (23 in) length engine support cross bar is not available it may be necessary to remove the vehicle hood for additional
clearance if a longer cross bar is to be substituted.
8. Position a 58 cm (23 in) engine support fixture cross bar (1) longitudinally with J 36462-A leg assembly (3) next to the rear engine lift bracket.
9. Install a J 28467-1A clamp (2) to secure the longitudinal mounted cross bar to the transverse mounted cross bar.
10. Insert a J 28467-7A lift hook through a J 28467-6 bracket and install a J 28467-34 wing nut.