Torrent FWD V6-3.4L (2007)
Notice: Refer to Fastener Notice .
10. Tighten the transmission mount to transmission bolts using the following sequence:
1. Rear bolt
2. Middle bolt
3. Front Bolt
Tighten the bolts to 50 N.m (37 lb ft).
11. Tighten the engine mount to intermediate bracket bolts starting with the center bolt.
Tighten the bolts to 50 N.m (37 lb ft).
12. Ensure the rear transmission mount bracket is seated on the transmission housing.
13. Center the rear transmission mount in the rear cradle clevis.
14. Tighten the rear transmission mount to cradle bolts.
Tighten the bolts to 50 N.m (37 lb ft).
15. Remove the floor jacks.
16. Shake the powertrain vigorously from front to rear and allow the powertrain to settle.
