Torrent FWD V6-3.4L (2007)
7. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
REPAIR PROCEDURE
Use the appropriate terminal and follow the instructions in the J-38125.
Location of the terminal in the repair tray and the proper crimp tool can be found in the appropriate connector end view.
FCI Connectors
FCI CONNECTORS
TOOLS REQUIRED
J-38125 TERMINAL REPAIR Kit
REMOVAL PROCEDURE
Follow the steps below in order to remove terminals from the connector.
1. Slide the lever lock forward while pressing down on the lever lock release tab.