Torrent FWD V6-3.4L (2007)
Accelerator Pedal Position Sensor: Service and Repair
ACCELERATOR PEDAL POSITION SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel left lower closeout panel.
2. Remove the connector position assurance (CPA) from the accelerator pedal position (APP) sensor connector.
3. Disconnect the APP sensor harness connector.
4. IMPORTANT: Due to clearance issues, the upper attachment bolt cannot be removed from the accelerator pedal assembly. Loose then
bolt completely and leave the bolt in the component until the assembly is removed from the vehicle.
Remove the APP assembly attachment bolts.
5. Remove the APP assembly from the vehicle.
INSTALLATION PROCEDURE