Torrent FWD V6-3.4L (2007)
Important:
New transmitters are identified by a star on the back of the transmitter. It is important to verify that the replacement transmitters have a star on
the back.
1.
Replace both Remote Keyless Entry transmitters.
2.
Program the transmitters using the procedure listed in SI.
3.
Perform the following steps in the exact order:
1.
Remove the key from the ignition.
2.
Open and close the driver's door.
3.
Close all other doors/trunk/liftgates.
4.
Wait 5 minutes.
5.
Press the Unlock Button and verify that the doors all unlock.
^
If the customer's concerns are corrected, no further repairs are required.
^
If the customer's concerns are NOT corrected, proceed with step 5.
Important:
In most cases, steps 1-3 will correct the customer's concern. In a few cases, it may be necessary to replace the RCDLR.
4.
If the customer's concern is still present, replace the RCDLR.
5.
Program the RCDLR with the latest software update available through TIS2WEB.
6.
Reprogram both Remote Keyless Entry Transmitters.
Parts Information
Warranty Information
