Torrent FWD V6-3.4L (2007)
Brake Light Switch: Adjustments
STOP LAMP SWITCH ADJUSTMENT
ADJUSTMENT PROCEDURE
1. NOTE: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive
brake lining wear.
Disconnect the electrical connector from the stop lamp switch.
2. Rotate the switch counterclockwise and remove the switch from the switch retainer.
3. IMPORTANT: Do NOT depress the brake pedal assembly during the stop lamp switch installation. This will cause a drag condition on the
brake.
Install the switch to the bracket by turning and pushing the switch until the switch bottoms on the brake pedal.