Torrent FWD V6-3.6L (2008)
7. Remove and discard the sealing washers from the evaporator outlet hose and the compressor hose.
8. Install protective caps to the TXV, the liquid line, and the compressor hose to prevent contamination and desiccant saturation.
Installation Procedure
1. Remove the protective caps from the TXV, the liquid line, and the compressor hose.
2. Install new sealing washers to the evaporator outlet hose, liquid line, and the compressor hose.
3. Install the evaporator outlet hose and the liquid line to the TXV.
Notice: Refer to Fastener Notice.
4. Install the evaporator outlet hose and the liquid line nut to the TXV.
Tighten the nut to 20 N.m (15 lb ft).
5. Install the evaporator outlet hose to the compressor hose.
6. Install the evaporator outlet hose nut to the evaporator outlet hose.