Trans Sport V6-191 3.1L (1990)
18.
Remove the rivet from the lock cylinder retainer, on vehicles with power lock. Remove retainer and cylinder (discard cylinder).
19.
Recode the lock cylinder supplied in kit and reinstall.
20.
Reinstall lock cylinder retainer plate. Using a long nose rivet gun, install a 1/8" X 1/4" aluminum rivet to the lock cylinder bracket. (On Vehicles
Equipped With Power Locks.)
21.
Reinstall cover plate and lock rods.
22.
Check for proper operation of the lock and lift gate before the next step.
23.
Reinstall trim panel.
24.
Reinstall D-pillar trim.
25.
Reinstall shoulder belt anchor bolts and torque to 35-48 N-m (26-35 lbs.ft.).
26.
Reinstall speaker cover.
Part Availability:
Parts are currently available from GMSPO.
Labor Operation Number:
T1838
Labor Time Allowance:
2.5 Hrs.