Trans Sport V6-191 3.1L (1990)
Position wedge between RH I/P outer support (811) and I/P lower trim pad (807) (Figure 7). Wedge will provide sufficient clearance for
removal and installation of heater core.
Heater Core
15.
Heater and A/C control vacuum harness (117) from vacuum/electric solenoid (116) (Figure 8).
16.
Two screws retaining vacuum/electric solenoid (116) (Figure 8).
17.
Vacuum/electric solenoid (116) from heater core cover (112) (Figure 8).