Trans Sport V6-191 3.1L (1990)
Side Cover And Control Valve View
REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Left front tire and wheel assembly.
3. Engine Harness wires from transaxle.
4. Splash shield.
5. Valve body cover and gasket to transaxle bolts.
INSTALL OR CONNECT
1. Valve body cover with a new gasket and bolts.
2. Engine Harness wires to transaxle.
3. Splash shield.
4. Left front tire and wheel assembly.
5. Lower vehicle.
ADJUST:
^
Fluid level.