Vibe L4-1.8L (2008)
Under the Front Suspension Crossmember
Position the floor jack (2) pad as follows:
*
Spanning at least two of the (front suspension crossmember) (1) rear reinforcement ribs (preferred location).
*
Spanning both of the (front suspension crossmember) (1) front reinforcement ribs (optional location).
Under the Rear Suspension Crossmember
Important: The floor jack (2) pad must not be placed under the rear suspension crossmember (3) front reinforcement rib.
Position the floor jack (2) pad as shown in the illustration.
Under the Front Control Arm
Position the jack as shown in the illustration.
Jack Stands
Under the Frame Rails
Important: The jack stands must not contact the rocker panels, the front fenders or the floor pan.
Position the jack stands as follows: