Vibe L4-1.8L (2008)
![background image](/pontiac/vibe/l4-1.8l/Page-1010001.png)
Pressure Regulating Solenoid: Service and Repair
Solenoids and Wiring Harness Replacement
Caution: Refer to Battery Disconnect Caution (See: Starting and Charging/Battery/Service Precautions/Technician Safety Information/Battery
Disconnect Caution).
1. Disconnect the negative (-) battery cable.
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals).
3. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement - Left Side (See: Body and Frame/Splash Guard/Service and
Repair/Engine Splash Shield Replacement - Left Side).
4. Place a drain pan or a suitable container under the transaxle fluid pan.
5. Allow the transaxle to cool, if necessary. Remove the transaxle drain plug (2) from the transaxle fluid pan.
6. Remove the following components from the transaxle:
*
The 18 bolts
*
The fluid pan
*
The fluid pan gasket
7. Remove the 3 oil filter retaining bolts, then the filter.
8. Disconnect the 4 solenoid connectors.
9. Remove the manual detent spring.