Vibe L4-1.8L VIN L (2003)
Rear Bumper Cover / Fascia: Service and Repair
Fascia Extension Replacement - Rear
Fascia Extension Replacement - Rear
Removal Procedure
1. Remove the screws (3) and spacers (1) from the left and right sides of the rear bumper fascia extension (2).
2. Remove the lower screws and washers from the rear bumper fascia extension.
3. Remove the rear bumper fascia extension and two way tape. Refer to Molding/Nameplate Replacement - Exterior Trim (See: Exterior Moulding /
Trim/Body Emblem/Service and Repair/Molding/Nameplate Replacement - Exterior Trim) in Exterior Trim.