Vibe L4-1.8L VIN L (2003)
Sunroof / Moonroof Cable: Procedures
SUNROOF DRIVE CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the headlining trim finish panel.
2. Remove the following components from the vehicle:
-
The 2 screws (2) from each side of the sunroof window
-
The sunroof window (1)
3. Remove the following components from the sunroof housing:
-
The 2 screws
-
The sunroof air deflector (1)
4. Disconnect the sunroof control module and sunroof actuator electrical connectors.
5. Remove the following components from the vehicle: