Vibe L4-1.8L VIN L (2003)
1. Install the mid spoiler to the lift gate by aligning the studs to the lift gate holes.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the 4 screws (2) and washers (1) to the left and right sides of the mid spoiler.
Tighten the mid spoiler screws to 5 N.m (44 lb in).
3. Install the 4 inner lift gate plugs (3) to the left and right sides of the lift gate.
4. Install the lift gate trim panel. Refer to Trim Panel Replacement - Lift Gate (See: Interior Moulding / Trim/Trim Panel/Service and Repair) in
Body Rear End.
