Vibe L4-1.8L VIN L (2003)
Compressor Clutch Bearing: Service and Repair
CLUTCH ROTOR AND/OR BEARING REPLACEMENT
REMOVAL PROCEDURE
TOOLS REQUIRED
-
J 41790 Compressor Holding Fixture
-
J 41552 Compressor Pulley Puller
-
J 33023-A Puller Pilot
-
J 33013-B Hub and Drive Plate Remover/Installer
-
J 33017 Pulley and Bearing Installer
1. Remove the A/C compressor.
2. Install the compressor onto the J41790.
3. Remove the clutch plate and hub assembly (2).
4. Remove the clutch rotor and bearing assembly retaining ring (3), using external snap ring pliers (1).