Vibe L4-1.8L VIN L (2003)
![background image](/pontiac/vibe/l4-1.8l_vin_l/Page-2364001.png)
Turn Signal Flasher: Service and Repair
HAZARD AND TURN SIGNAL FLASHER REPLACEMENT
The turn/hazard signal relay is located in the Junction Block behind the IP storage compartment tray.
REMOVAL PROCEDURE
1. Remove the IP storage compartment tray.
2. Remove the turn/hazard signal relay (1) from the Junction Block.
INSTALLATION PROCEDURE
1. Install the turn/hazard signal relay (1) to the Junction Block.
2. Install the IP storage compartment tray.