Vibe L4-1.8L VIN L (2003)
2. Install the bolt (3).
Tighten the bolt to 7.8 Nm (69.04 inch lbs.).
3. Install the pipe fitting (6) and the gear inlet hose to the steering gear.
Tighten the pipe fitting to 25 Nm (18.4 ft. lbs.).
4. Install the pipe fitting (7) to the steering gear.
Tighten the pipe fitting to 25 Nm (18.4 ft. lbs.).
5. Install the end of the gear outlet hose (9) to the cooling pipe.
6. Install the hose clamp in order to retain the hose to the pipe.
7. Install the bolt (4) in order to retain the hose to the steering gear.
Tighten the bolt to 7.8 Nm (69.04 inch lbs.).
Notice:
Refer to Using Proper Power Steering Fluid Notice in Service Precautions.
See: Steering and Suspension/Service Precautions/Vehicle Damage Warnings/Using Proper Power Steering Fluid Notice
8. Fill the power steering fluid reservoir.
Notice:
Refer to Air in the Power Steering System Notice in Service Precautions.
See: Steering and Suspension/Service Precautions/Vehicle Damage Warnings/Air In the Power Steering System Notice
9. Bleed the power steering system.
